BulletM2-HP BND 03

Ubiquiti


Ubiquiti Bullet M BulletM2-HP Wifi Outdoor Access Point with POE-24 12W and Grid Antenna ANT2325D24A 2.4GHz 24dBi


Model#: BulletM2-HP BND 03

Sku: IT3489



MSRP: $159.99


Out of stock

Model: BulletM2-HP US

Ubiquiti Bullet M2HP Plug and Go 100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links 2.4GHz Hi Power 802.11N Outdoor Radio System.

Bullet M is the latest version of the popular Ubiquiti Bullet. Like its predecessor, Bullet M is a wireless radio with an integrated Type N RF connector that can be directly plugged in to any Antenna* to create a powerful and robust outdoor Access Point, Client, or Bridge.

The Bullet M features a signal strength LED meter for antenna alignment, a low-loss integrated N-type RF connector, and a robust weatherproof design.

With up to 600mW of power and enhanced receiver design, the Bullet M is ideal for long-distance links, capable of 100Mbps+ real TCP/IP speeds over multi-km distances.

+

Model: ANT2325D24A

The ANT2325D24A 24dBi Parabolic Grid Antenna offers ultra high gain and high quality construction. It is ideal for directional 2.4 GHz 802.11b/g/n applications. The antenna's precise beam pattern and excellent front-to-back ratio help reduce unwanted interference.

The ANT2325D24A features a die-cast aluminum powder-coated grid that offers superior corrosion resistance and diminished wind loading. The weather resistant feed assembly offers low VSWR and features a 12 inch Coax Lead with an N-Female connector. It can be installed for either vertical or horizontal polarization. This antenna provides full 2.4 GHz band coverage (2400-2500 MHz) making it ideal for use with 2.4 GHz 802.11b/g/n WiFi access points and 2.4 GHz wireless video systems.

The antenna consists of the 2-piece die-cast reflector, feed assembly, 60 degree tilt & swivel pole mount bracket and assembly hardware.

BulletM2-HP
 

  • 100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links
  • No radio card / host board issues
  • No RF cable quality concerns
  • No mechanical stability concerns
  • No enclosure mounting requirements
  • Just Plug and Go.
  • Processor Specs: Atheros SOC, MIPS 24 KC, 400MHz
  • Memory Information: 32MB SDRAM, 8MB Flash
  • Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
  • Approvals: FCC Part 15.247, IC RS210, CE
  • RoHS Compliance: YES
  • RF Connector: Integrated N-type Male Jack (connects directly to antenna)
  • Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)

POE-24 12W

  • Carrier class power over ethernet system
  • Auto ranging power supply/ inserter
  • Built-in ethernet surge protection to prevent equipment damage
  • Overload and short circuit protection
  • Minimum cross talk and insertion loss
  • Advanced switching technology ? runs cool
  • Powers clients which accept power on unused ethernet pins 4,5,7,8
  • FCC and CE approved
  • Current indicator (CI) option available
  • Applications
  • Remote routers, access points and bridges
  • Remote networking equipment
  • SOHO equipment
  • IP camera systems
  • 400MHz to 10GHz systems
  • IP phone systems

 

Model: ANT2325D24A

  • Die-cast aluminum construction
  • UV stable light gray powder coat finish
  • 12° beam-width & 12 inch coax lead
  • Easy to assemble
  • All weather operation
  • 2.4 GHz ISM Band
  • IEEE 802.11b/g/n Wireless LAN Applications
  • WiFi Systems & Long-range Directional Applications
  • Point to Point Systems & Point to Multi-point Systems
  • Wireless Bridges, Backhaul Applications & Wireless Video Systems