Model: C5C
The C5c has been designed specifically to handle long-range backhaul (PTP), point-to-multipoint (PTMP) GigaPoP links, and PTMP MicroPoP links impaired by vegetation. Connectorized by design, the C5c mates with many popular antennas, delivering 700 Mbps of TCP throughput.
The Mimosa C5C is a flexible connectorized client radio solution for accommodating long range and custom antenna solutions. Incorporating unique Multi-User MIMO technology and support for Mimosa’s SRS technology, the C5c enables the fastest speeds and is the most scalable wireless access solution available today. The C5c is ideal for professionally-installed rural fixed wireless and long range applications for point-to-point backhaul links.
Flexible Antenna Options
Connect to virtually any dual polarization antenna to Custom engineer longer distance client links. The C5c Has dual RP-SMA connectors for easy cabled antenna Connectivity. It can be mounted to any pole via hose Clamps or easily clipped onto antennas supporting Compatible clip-on mounting bracket systems.
PTP Backhaul Links
The C5c provides extreme price/ performance for PTP backhaul links in a small form factor. Wide frequency range support allows avoidance of crowded 5 GHz spectrum bands. Where regulations allow, long distances are enabled with high system power and flexible antenna options.
SRS Client
The C5c offers client-side support for Mimosa’s proprietary Spectrum Reuse Synchronization (SRS) technology. This ensures each client device precisely receives and transmits under the timing control of the access point and can dynamically request upstream bandwidth.As opposed to alternative (fixed) timeslot protocols, upstream bandwidth and latencies are allocated on demand which enables significantly higher overall upstream network bandwidth utilization.
+
Model: Ubiquiti POE-24-24W-G
The POE-24-24W-G 24V PoE 1A Gigabit Adapter from Ubiquiti Networks has features like surge protection, clamping protection, maximum surge discharge, and peak pulse current to help protect your Ubiquiti PoE devices. It also includes an AC cable with earth ground.
ESD attacks are the leading cause for device failures. You can effectively protect against ESD attacks using this grounded PoE adapter.
Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE, including:
Device Protection
PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events.
SKU: C5C
Performance
Max Throughput: 500+ Mbps IP (866 Mbps PHY)
Wireless Protocols: WiFi Interop Mimosa SRS
Modes: PTMP Client PTP Backhaul
Radio
MIMO & Modulation: 2x2:2 MIMO OFDM up to 256-QAM
Bandwidth*: 20/40/80 MHz channels tunable to 5 MHz increments for Mimosa SRS; Tunable to standard WiFi channels for WiFi Interop
Frequency Range: PTMP: 4900 - 6200 MHz - PTP: 4900 - 6400 MHz, Restricted by country of operation ‘new’ US/FCC 5600-5650 MHz support FCC DFS (U-NII-2a, U-NII-2c) availability pending certification
Max Output Power: 27 dBm
Sensitivity ( MCS 0 ): -87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz
Power
Max Power Consumption: 12.9 W
System Power Method: Passive PoE (24-56VDC)
PoE Power Supply: Passive PoE compliant, 48-56 V Power over Ethernet supply (included)
Physical
Dimensions: Depth - 44.0 mm (1.73”), Width - 65 mm (2.56”), Height - 188.4 mm (7.42”)
Weight: 295 gr (10.4 ounces)
Mounting: Single pole strap
Connector Type: RP-SMA (x2)
* 4.9 GHz uses 20 MHz channel widths (US only, regulations vary by region)
** Enabled in future software release
SKU: POE-24-24W-G
1 x Gigabit LAN/1 x PoE Port
Remote Reset Capability
Reset Button
Power Indicator
80+% Efficiency
65 kHz Switching Frequency
IEC-320 C6 AC Connector
Output Voltage: 24 VDC at 1.0A